Ftm 500 In Pl Out Pl Tone. Yaesu FTM500DE Radiotelefon mobilowy 144/430MHz If you need to access the repeaters which requires a 1750Hz. CTCSS or PL is a subaudiable tone that is carried with your transmission, usually at the beginning
YAESU FTM500DE 144/430MHz FM+C4FM 50W GPS from hamradioshop.pl
Ignoring DCS for the time being, the difference between tone and tone squelch is that the tone is used to access the repeater whereas tone squelch is what is used on receive to control what you hear If the frequency is "noisy" (kiddies with FRS noise-makers) you may also want to enable the corresponding Rx tone to block them out
YAESU FTM500DE 144/430MHz FM+C4FM 50W GPS
If you are close enough to not need the repeater, then your Tx and Rx would be the same frequency With TON.SQL, the repeater will have to be transmitting the tone to break the squelch on your radio If you are close enough to not need the repeater, then your Tx and Rx would be the same frequency
Yaesu FTM500DE Radiotelefon mobilowy 144/430MHz. CTCSS or PL is a subaudiable tone that is carried with your transmission, usually at the beginning The FTM-400 has a lot of features that go way beyond CTCSS.
YAESU FTM500DE radiotelefon amatorski VHF/UHF CYFROWY C4FM GPS APRS. In this process, you program the receive frequency with. The TON.SQL is really only useful if you have two repeaters on the same output frequency covering the same area, usually the fringe of both repeaters.